Engine timing components during replacement work
All Services
Timing Chain Replacement

Timing Chains

Chain, Tensioner & Guides Replaced in Bedlington — from £649

Timing Chain Replacement in Bedlington

A timing chain does the same job as a cambelt — keeping the engine's valves and pistons in sync — but with a metal chain running inside the engine, lubricated by the oil system. Chains outlast belts, which is why they have no fixed replacement interval, but the parts around them wear: the tensioner that keeps the chain tight and the guides it runs on are the usual culprits, and the chain itself stretches with age and poor oil maintenance.

When that wear sets in, the engine will usually tell you — most often as a rattle from the front of the engine in the first seconds after a cold start. That symptom is worth acting on quickly, because the difference in cost between a worn tensioner and a jumped chain is enormous.

Cold-start rattle

The classic first warning — a rattle that fades as oil pressure builds. Book a diagnostic check before it gets worse.

Timing fault codes

A stretched chain throws camshaft/crankshaft correlation faults and can put the engine management light on.

Oil history matters

Chains live in engine oil. Missed oil changes accelerate chain and tensioner wear — another reason regular servicing pays.

Not sure belt or chain?

It depends on the exact engine. Send your reg below and we will tell you which system your car uses.

If your engine rattles on start-up or has timing-related fault codes, start with a diagnostic check — we confirm the cause before recommending a chain replacement, not after.

What the Job Involves — From £649

Replacing a timing chain properly means replacing the system, not just the chain — a new chain on worn guides and a tired tensioner rarely lasts. Our timing chain service includes:

Chain, tensioner & guides

The full kit replaced together to manufacturer specification, so the new chain runs on new hardware.

Manufacturer timing procedure

The engine is retimed using the manufacturer's locking and timing procedures and torque specifications.

Fresh oil where required

Chains are oil-fed — where the job disturbs the oil system we refill with the correct specification oil.

Road test & warranty

Every job finishes with a road test, and all work is covered by our 12-month / 10,000-mile workmanship warranty.

Chain jobs vary more than belt jobs because access differs so much between engines — some chains sit accessibly at the front of the engine, others need substantially more dismantling to reach. That is why the price is "from" £649: we confirm the exact price for your registration before anything is booked in, and most jobs are completed within a day.

Get Your Exact Price

We are an independent garage at 70 Glebe Road, Bedlington NE22 6JU — about ten minutes from Ashington, Blyth and Cramlington, fifteen from Morpeth, and roughly half an hour from most of Newcastle via the A19/A189. Send your registration and we will confirm whether your engine runs a chain, a belt or a wet belt, and the exact price for the job.

Get Your Exact Price

Prices start from £649— enter your reg and we'll call you back with the confirmed price for your exact engine. No obligation.

No payment taken online. We confirm your price before anything is booked in.

Frequently Asked Questions

Guide Price

From £649

Typical duration: Up to 1 day

No hidden charges
Quote before work begins
Get My Exact Price

Get a Quick Estimate

Visit Us

70 Glebe Rd, Bedlington, Northumberland, NE22 6JU
01670 708599

Ready to Book?

Contact Bedlington MOT and Service Centre today. We're at 70 Glebe Rd, Bedlington, NE22 6JU.

Call Now
Ask Senna